Skip to content
RMS, the Rapid Measuring Solution. In daily use in Thailand, Pakistan and Germany. Investor Login
Thullex
Garment measurement for the factory inspection desk

Retire the tape.

Thullex makes RMS, a camera station that clamps onto the inspection desk your factory already has. Lay a garment flat, click measure, and every point of measure is checked against the spec and saved with the image.

3 weeks
from unboxing to daily use
78
measurements, 6 garment types
Offline
runs on site, no internet
Click Measure to find the points of measure
ReadyGarment on the desk

Try a measurement

Ready
  1. 1Click Measure to find the points of measure
  2. 2Drag a handle to move one measurement
  3. 3Pick another garment, top left
Garment on the desk. Click Measure. T-shirt

Scans 116 · DESK-01 · 00:00:00
Sample illustrations. Real results come from a calibrated camera over your desk.

In use today

RMS is already measuring garments every day.

See every site on the map
0

measurements in the first month at one factory, from about 3,000 scans

One scan measures several points on the garment at once. Company data, Pakistan.

0 countries

with RMS in daily use

Thailand, Pakistan and Germany. Open rings: also installed in Sri Lanka and Hong Kong.

1 to 0

stations at the first production customer after it reordered

Thailand. The dashed desks stand for an MOU to roll RMS out factory-wide; the count isn’t set.

0 hours

to a first support response, with remote service on every device

Thullex support terms.

The problem

Same label, different garment

Take a black T-shirt and a white one in the same size off the same rack and hold them together. They often won't match.

“Clothing is essentially an organic product. Even with a high share of synthetic material, the raw material always behaves slightly differently, even within a single roll of fabric. Volume manufacturing, like dyeing and cutting, adds technical factors on top. Clothing will keep varying for a long time to come. That’s only a problem if you don’t notice it.”

Hannes Thull, founder

Most factories find out with a tape measure, a few pieces at a time. Two inspectors measuring the same shirt get two different numbers, so the garment’s variation gets mixed up with the tape’s, and the pieces nobody checks go out the door. The inspectors are doing their best. The tape is the problem.

RMS gives every desk the same method and the same tool, so a number from one desk means the same thing at the next desk and in the next factory. A 32 should be a 32, in every factory that makes one.

Why we build this
M M 1 2 3
PointSpecThis oneOff by
1P0300 Chest width20.0 in20.9 in+0.9 in
2P0002 Front length24.1 in23.1 in−1.0 in
3P0064 Sleeve length8.0 in8.5 in+0.5 in

Illustrative values, with the differences drawn larger than scale. Solid: the spec. Dashed: another garment with the same size label.

How it works

Lay it flat, click measure, and it's done in seconds

RMS finds the keypoints and seams, measures every point the same way each time in calibrated real units, and shows pass or fail against your tolerance. The image and the numbers are saved as a record, so the speed comes with proof.

An operator's hands laying a garment flat on the inspection desk
01

Lay the garment flat

On the inspection desk you already have. The camera sits on a clamp-on arm above it, so there's no drilling and no new furniture.

The RMS camera head mounted on its arm over a blue shirt
02

Click measure

The software finds the points of measure and the seams, including the right seam on multi-layer areas, and calculates every measurement in inches or centimeters.

A black T-shirt with RMS measurement lines and values in centimeters
03

Pass, fail, saved

Each point is checked against your spec and tolerance. The image and the measurements are saved together, ready for the conversation with the brand.

See the RMS platform Real RMS output on a real garment. Values shown in the customer's unit.
What you get

Built for the factory desk, and it grows with your spec

01

Seconds per garment, every point checked

The operator lays it flat and clicks measure. Every point comes back in seconds, checked against the spec and saved with the image.

02

One method, one tool, every desk

Every desk measures the same points the same way. A camera doesn't pull the tape tighter at the end of a shift. Calibrated to real-world units, checked against your tolerances.

03

Fits the desk you have

An industrial USB camera, a mini computer and a clamp-on arm. Runs on site with no internet connection.

04

Grows with your spec

Teach a new measurement in the software. After a few uses, Thullex automates it within two to three weeks.

05

A record for every garment

Image, codes, values, tolerances and the result, saved for every piece and ready for supplier conversations.

Where fit is decided

Fit starts at the source

A garment passes through a lot of hands before a shopper tries it on. The inspection desk is the last place a factory can measure it against the spec, and the only place the whole batch passes through.

Tech packThe spec and tolerances are written.
CuttingFabric relaxes and shrinks. Panels drift.
SewingSeam allowances vary by operator.
FinishingWashing and pressing change the size again.
Inspection deskRMS measures every piece against the spec and keeps the record.
PackingThe size label goes on.
ShippingThe brand receives the lot.
StoreTwo garments, one label, two sizes.
ShopperIt doesn't fit. It comes back.

Fit is the most common reason shoppers give for an apparel return. Online apparel return rates average about 30%. Source: Radial and Two Boxes survey of 200 retailers, 2025.

Proof

From unboxing to daily use in three weeks

A large manufacturer in Pakistan that had never seen RMS set it up in the first week, calibrated it in the second and was measuring by the third.

No Thullex engineer on site. A kit in a case, a video call, and a team that wanted the numbers. In its first month the station logged about 3,000 scans. Each scan records several measurements, five on average and up to 20, so that came to about 10,000 measurements.

Company data, Pakistan deployment, first month. Customer not named.

Start your own pilot
WEEK 01

Mounted

Arm clamped to the desk, camera and mini computer connected to the existing monitor.

WEEK 02

Calibrated

Camera height set, scale calibrated to real-world units, first garment category loaded.

WEEK 03

Measuring

Operators measuring on the line, results saved with every image.

MONTH 01

In daily use

0
measurements logged
An RMS station at a working inspection desk with an operator placing a garment under the camera
RMS at a customer inspection desk. Garment inspection, South Asia.
Measurement library

Six garment types ready today, 78 measurements enabled

Each garment type comes with its points of measure, captured from the front, back and sleeve views your tech pack needs. Dresses and bras are in development with key clients.

RMS capability overview, 2026: 6 garment types, 14 captured views, 78 measurements enabled, 81 measurement codes defined. Seconds saved are estimates: the founder’s hand timings at customer desks against about 30 seconds a piece with RMS, timed on underwear. The polo figure is an end-of-line check of up to 10 points. Every piece is also measured the same way and saved with its image.

Footprint

A distributed team across Europe, the US and Asia

Kits are installed in Pakistan, Sri Lanka, Thailand, Hong Kong, Germany and the USA. RMS is in daily use in Thailand, Pakistan and Germany.

Germany New York Philadelphia Sri Lanka Pakistan Thailand Hong Kong Vietnam Brazil
In daily use Team Installed, agent or tested

Site list per Thullex, November 2026. Installed and in daily use are kept separate on purpose.

Who it's for

One system, three readers

Factory owners and managers

One desk, twice the garments checked

Clamps onto the desk you have and is live in about three weeks. At one customer, one RMS desk covers the work of two tape desks, with every point measured the same way and saved with the image. Estimate

Run the calculator
Brands and design studios

See the factory floor from the design studio

Your design studio sees what’s measured on the factory floor as it happens, catches mistakes early, and checks production against the approved sample. Your points of measure and tolerances are measured the same way at every supplier.

See the brand’s view
Investors

A real problem, proof it works, a path to scale

Ten years of scanning garments and bodies behind the product, in daily use in three countries, and a cloud service built to be sold by subscription on top of every desk.

Request data room access
Next step

Measure one of yours.

Tell us what you make and we'll measure it. A pilot starts with how your line measures today, and the changes come after your team trusts the numbers.

SUPPORTFirst-level support within six hours, remote service on every device, and health monitoring that notices a blurred lens or a moved camera.

RUNS OFFLINEOn site, on Ubuntu, with no internet connection. A software-only version for your own computer and camera is in trial.

ELEVATION A-AH ≈ 1000FOV ≈ 1100 × 800DESK EXISTING1234RMS STATION · CLAMP-ON ARM1 CAMERA 2 ARM 3 CLAMP 4 GARMENT ON DESKSCALE1:20SHEET01 / 01